Industry Info

What should be done for inspection and maintenance of organic fertilizer granulator?

Organic fertilizer equipment organic fertilizer granulator is mainly the necessary equipment for the organic production line. How can it be done during inspection and maintenance? Today we will share with you, I hope it can be helpful to everyone, let's take a look at the following introduction.
fertilizer granulator
1. Bearing: It is the entire load-bearing center of the whole organic fertilizer granulator, so it is very important for the maintenance of the bearing. Its quality directly determines the service life and operating rate of the machine. It must be clean and the seal must be good.

2. For newly installed wheel rims, they must be inspected frequently, because loosening is likely to have the greatest impact on the machine.

3. Check whether the parts of the machine are working properly, do a good job of checking the degree of wear of the easy-wear parts, and pay attention to replacing the worn parts at any time.

4. If the oil temperature of the bearing of the organic fertilizer granulator rises, it should be stopped immediately for inspection to eliminate the cause.

5. The removal of dust and other impurities should be done to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, which will cause serious accidents.